- 软件介绍
- 相关文章
The SSM2304 is a fully integrated, high efficiency, Class-D stereo audio amplifier. It is designed to maximize performance for portable applications. The application circuit requires a mini-mum of external components and operates from a single 2.5 V to 5.0 V supply. It is capable of delivering 2 W of continuous output power with less than 10% THD + N driving a 4 load from a 5.0 V supply.
The SSM2304 features a high efficiency, low noise modulation scheme. It operates with 85% efficiency at 1.4 W into 8 from a 5.0 V supply and has a signal-to-noise ratio (SNR) that is better than 98 dB. PDM modulation is used to provide lower EMI-radiated emissions compared with other Class-D architectures.
The SSM2304 has a micropower shutdown mode with a typical shutdown current of 20 nA. Shutdown is enabled by applying a logic low to the SD pin.
The architecture of the device allows it to achieve a very low level of pop and click. This minimizes voltage glitches at the output during turn-on and turn-off, thus reducing audible noise on activation and deactivation.
The fully differential input of the SSM2304 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximately VDD/2.
The SSM2304 also has excellent rejection of power supply noise, including noise caused by GSM transmission bursts and RF rectification.
The SSM2304 has a preset gain of 18 dB, which can be reduced by using external resistors.
The SSM2304 is specified over the commercial temperature range (40C to +85C). It has built-in thermal shutdown and output short-circuit protection. It is available in a 16-lead, 3 mm 3 mm lead-frame chip scale package (LFCSP).
Applications
Notebooks and PCs Mobile phones MP3 players Portable gaming Portable electronics Educational toys
